MuproD

News & Events

2014-14-11 REGIONAL INDUSTRIAL WORKSHOP ON ZERO DEFECT MANUFACTURING
Image about REGIONAL INDUSTRIAL WORKSHOP ON ZERO DEFECT MANUFACTURING
TECNALIA and IK4 work towards the zero defect manufacturing together with the consortiums of MUPROD and MIDEMMA that they respectively coordinate.
Read more
June 2014 ENKI holds a BtoB meeting with a client in Saudi Arabia.
Image about ENKI holds a BtoB meeting with a client in Saudi Arabia.
ENKI holds a BtoB meeting with a client in Saudi Arabia.
Read more
May 2014 Under the headline: 'Zero tolerance for manufacturing faults' the story of the MUPROD project was published on the Horizon 2020 website.
Under the headline: "Zero tolerance for manufacturing faults" the story of the MUPROD project was published on the Horizon 2020 website. The piece tells of the new software and hardware solutions which introduce technological, model-based and methodological innovation into integrated quality control systems for production, offering a real-time in-process solution for zero defects and minimal manufacturing wastage.
Read more
April 2014 Dr. Colledani of Politecnico Di Milano was co-organizer and chairman of the Special Session on
Dr. Colledani of Politecnico Di Milano was co-organizer and chairman of the Special Session on "Zero Defect Manufacturing" sponsored by MuProD and the 4ZDM EU Cluster within the CIRP 24th Design Conference 2014, Milano, Italy
Read more
18/12/2103 Zero tolerance for manufacturing faults
EU-funded researchers and industrialists are developing monitoring tools for the production line that can prevent and correct defects faster. This innovation will reduce costs, downtime and wastage, and lead to better, safer products.
Read more
10/2013 Paper- Proactive Quality Control System for Defect Reduction in the Production of Electric Drives, D. Coupek, A. Verl, J. Aichele, M. Colledani

Read more
10/2013 

Pictures of the poster that was presented at the IEEE EDPC-2013 3rd International Electric Drives Production Conference in Nuernberg, Germany .


Read more
10/2013 Updated poster of Muprod, presented in a conference by Bosch and Umiversity of Stuttgart

Read more
February 26-28, 2013 Enki Dissemination
Image about Enki Dissemination
ENKI posted information about the MuProDproject (poster + brochure) at its stand at theMedtec exhibition held in Stuttgart, Germany on February 26-28, 2013.

Below are some pictures from the ENKI stand.
Read more
29-31/5/2013 Dispatching rule-based algorithms for a dynamic flexible flow shop scheduling problem with time-dependent process defect rate and quality feedback
Publication in Conference Proceedings:
46th CIRP Conference on Manufacturing Systems
Location: Setubal, Portugal
Read more
26/12/2012 IBM research blogthat was uploaded recently, which also mentions MuProD
Weblog
Read more
6-8/11/2012 HVC 2012, hosted by IBM Research – Haifa, is the eighth in the series of annual conferences dedicated to advancing the state-of-the-art and state-of-the-practice in verification and testing.
Conference
Read more
28/03/2012 First Joint Meeting of MuProD Project
Image about First Joint Meeting of MuProD Project
The first joint meeting of MuProD project was held on March 21st and 22nd 2012, at Polimi (politecnico di Milano) facilities in Milan(Italy).
Read more
13/03/2012 6 Months Meeting of MuProD Project
First six months meeting will take place in Polimi’s facilities in the beautiful city of Milan, with the attendance of the partners involve in the project.
Read more
22/12/2011 The kick-off meeting
Image about The kick-off meeting
The kick-off meeting took place on the 14th and 15th of December 2011 in Technology Park of Bizkaia (Spain).
Read more
12/12/2011 Kick-Off Meeting of MuProD Project
Kick-Off Meeting of MuProD Project will take place the 14th and 15th of Dicember 2011 in Technology Park of Bizkaia (Spain), at the facilities of Tecnalia Building 204.
Read more

 

Papers in conferences

Partner Details Date Attachments
/Links

Politecnico di Milano

Workshop Large-scale coordinate metrology: study and realization of an innovative system based on a network of distributed and cooperative wireless sensors Politecnico di Torino – Room DIGEP B  27 February 2013

2/2013

 

Technion

"Data Fusion and 3D Geometric Modeling from Multi-Scale Sensors", D. Tansky, A., Fischer, CIRP Design International Conference on Smart Product Engineering, Bochum, Germany, March 2013

3/2013

 

Politecnico di Milano

2013 Invited discussant at the First Stu Hunter Conference 12-15 March 2013 - NH Marquette Netherlands (discussant of the paper Latent structures based-multivariate Statistical process control: A paradigm shift presented by A. Ferrer).

3/2013

 

Politecnico di Milano

Ninth International Conference on Stochastic Models of Manufacturing and Service Operations, SMMSO 2013, , Seeon, Germany: Colledani M. Ebrahimi D. “Performance Evaluation of Selective and Adaptive Assembly Systems” in the conference Proceedings, pp. 17-26

5/2013

 

EPFL

"Dispatching rule-based algorithms for a dynamic flexible flow shop scheduling problem with time-dependent process defect rate and quality feedback, Byung Jun Joo, Yong Chan Choi, Paul Xirouchakis. 46th CIRP Conference on Manufacturing Systems, Setubal, Portugal, 29-31/5/2013

5/2013

 

Politecnico di Milano

Process parameters effect on cutting forces and geometrical quality in thin wall micromilling.Massimiliano Annoni, Stefano Petrò, Lara Rebaioli, QuiricoSemeraro, Riccardo Solito. NAMRC 41 – 41st North American Manufacturing Research Conference, Madison (USA),10 - 14 June 2013

6/2013

 

Politecnico di Milano

2013 Invited presentation to the session entitled: “A Decade of Profile Monitoring: What’s Next? “ of the Joint Statistical Meeting 2013, Montreal (Canada) August 3-8 2013

8/2013

 

Politecnico di Milano

Dr. Colledani's paper " Integrated Quality and Production Logistics Analysis of Selective Assembly Systems" presented at the AITEM Conference was awarded honorable mention as one of the four finalists of the Young Author Prize at the 11th AITEM Conference in Italy.

9/2013

 

University of Stuttgart,
BOSCH
Politecnico di Milano

3rd International Electric Drives Production Coupek, D.; Verl, A.; Aichele, J.; Colledani, M.: Proactive Quality Control System for Defect Reduction in the Production of Electric Drives. In: Proceedings of the 3rd International Electric Drives Production Conference,.Nürnberg: IEEE Catalog Number CFP1385P-

10/2013

 

Politecnico di Milano

E. Del Castillo,  B.M. Colosimo, S. Tajbakhsh, 2014, Geodesic Gaussian Processes for the Reconstruction of a Free-Form Surface, to appear in Technometrics - Published online: 13 Mar 2014  - DOI:10.1080/00401706.2013.879075, available at link

3/2014

Link

TRIMEK

B. de la Maza “Innovative proactive Quality Control system for in-process multi-stage defect reduction”

3/2014

Link

Technion
Politecnico di Milano
Tecnalia

Dr. Colledani was co-organizer and chairman of the Special Session on "Zero Defect Manufacturing" sponsored by MuProD and the 4ZDM EU Cluster within the CIRP 24th Design Conference 2014, Milano, Italy

4/2014

 

Politecnico di Milano

CIRP 24th Design Conference 2014, Milano, Italy  Colledani M., Ebrahimi D., Tolio T. “Integrated quality and production logistics modelling for the design of selective and adaptive assembly systems” CIRP Annals - Manufacturing Technology, Volume 63, Issue 1, 2014,

4/2014

Link

Politecnico di Milano
University of Stuttgart
Bosch

CIRP 24th Design Conference 2014, Milano, Italy . M. Colledani, D. Coupek, A. Verl, J. Aichele, A. Yemane: Design and Evaluation of In-Line Product Repair Strategies for Defect Reduction in the Production of Electric Drives. In:24th CIRP Design Conference. Milan

4/2014

Link

Politecnico di Milano
Technion

Tansky D., Fischer A., Colosimo B.M., Pagani L., Shabat Y.B., 2014, Multi-Sensor Multi-Resolution Data Fusion Modeling 24th CIRP design conference, 14-16 April, 2014, Milano, Italy

4/2014

 

Technion

CIRP 24th Design Conference 2014, Milano, Italy Colledani M., Fischer A., Iung B., Lanza G., Schmitt R., Tolio. T., Vancza J.,  “Design and management of manufacturing systems for production quality” CIRP Annals - Manufacturing Technology, Volume 63, Issue 2, 2014, Pages 773-796

4/2014

Link

University of Stuttgart

Jens Friedrich, Henning Hartmann, Alexander Verl and Armin Lechler, “Continuous Learning Support Vector Machine to estimate Stability Lobe Diagrams in Milling”Flexible Automation and Intelligent Manufacturing, FAIM2014

5/2014

University of Stuttgart

MOTSP 2014, Brac, Croatia

6/2014

 

IBM Israel

DAC 2014 – Invited talk at the automotive track

6/2014

 

Politecnico di Milano

Paper invited to be presented in the Technometrics session of the next Joint Research Conference June 24-26 2014 (Seattle, USA).

6/2014

Link

Politecnico di Milano

B.M. Colosimo, M. Grasso, A. Menafoglio, and P. Secchi Combining Warping Functions and Functional Principal Component Analysis to enhance Profile Monitoring of Signal data. Joint Research Conference June 24-26 2014 (Seattle, USA) 

6/2014

Link

Politecnico di Milano

Maggioni M., Marzorati E., Grasso, M., Colosimo B.M., Parenti P., 2014, In-Process Quality Characterization of Grinding Processes: a Sensor-Fusion Based Approach – to be presented at ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis (ESDA2014) Copenhagen, Denmark, 25 – 27 June, 2014.

6/2014

Conference Download Link (Conference Link is copyright protected and requires registration)

Paper and presentation download link

Politecnico di Milano

M. Annoni, B.M. Colosimo, L. Pagani, L. Rebaioli, Q. Semeraro, 2014,Detroit, Geometrical quality improvement of high aspect ratio micromilled pins Proceedings of NAMRI/SME, Vol. 42, 2014

6/2014

 

University of Stuttgart

Daniel Coupek, Jens Friedrich, Alexander Verl, Armin Lechler: Modular Information Sharing Platform for Real-Time Data Processing and Knowledge Extraction in Modern Production Systems. In: Management of Technology Step to Sustainable Production (MOTSP). Bol, Croatia

6/2014

University of Stuttgart

CIRP ICME 2014, Naples, Italy Coupek, Daniel; Gülec, Aybike; Lechler, Armin; Verl, Alexander: Selective rotor assembly using fuzzy logic in the production of electric drives. In: Procedia CIRP, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering. Naples: Elsevier, 2014

7/2014

 

University of Stuttgart

BOSCH

4th International Electric Drives Production Conference and Exhibition 2014, Nuremberg 4th International Electric Drives Production Conference and Exhibition 2014, Nuremberg Defect Reduction in the Production of Electric Drives by Downstream Compensation and Space-Resolved Inspection, D. Coupek, A. Verl, A. Lechler, J. Aichele, S. Junker

9/2014

 

Politecnico di Milano

B.M. Colosimo, L. Pagani, Q. Semeraro, E. del Castillo, 2013, Geodesic Gaussian Process for the Reconstruction of Micro-Pins Surfaces, S.Co. 2013, Complex data modelling and Computationally Intensive Statistical Methods for Estimation and Predictions, 9-13 September, Milano

9/2014

Link

Politecnico di Milano

P. Cicorella and B.M. Colosimo, 2013, Statistical process monitoring of Complex Shapes via Gaussian Process modeling, S.Co. 2013, Complex data Modelling and Computationally Intensive Statistical Methods for Estimation and Predictions, 9-13 September, Milano

9/2014

Link

Technion

Y. Ben-Shabat*, A., Fischer, "Design of Porous Micro-Structures using Curvature Analysis for Additive-Manufacturing", CIRP Design International Conference on Innovative Product Creation, Haifa, Israel, March 2015

3/2015

 

 

Participation in conferences and fairs

Partner Details Date Attachments
/Links

Techalia

BIEMH 2012, Show leaflets of the project - BILBAO

6/2012

 

IBM Israel

HVC 2012, hosted by IBM Research – Haifa, is the eighth in the series of annual conferences dedicated to advancing the state-of-the-art and state-of-the-practice in verification and testing, 6-8/11/2012

11/2012

Link

ENKI

Medtec exhibition held in Stuttgart, Germany on February 26-28, 2013.

2/2013

 

Technion
BOSCH
University of Stuttgart

Updated poster of Muprod, presented in a conference by Bosch and University of Stuttgart

10/2013

 

Politecnico di Milano

Dr. Colledani was invited participant to the Manufuture 2013 Conference in Vilnius where a MuPRoD poster was presented

10/2013

 

Technion
BOSCH
University of Stuttgart

Updated poster of Muprod, presented in a conference by Bosch and University of Stuttgart

10/2013

 

BOSCH
University of Stuttgart

Pictures of the poster that was presented at the IEEE EDPC-2013 3rd International Electric Drives Production Conference in Nuernberg, Germany.
Website: http://www.edpc.eu/home/index.html

10/2013

 

Politecnico di Milano

Dr Colledani presented the major MuProD achievements at the "EMC2-Factory 6th General Assembly meeting + Exploitation Seminar 26-28/11/2013" in Milan, Italy

11/2013

 

Tecnalia /
Politecnico di Milano

HLG of MANUFUTURE Presentation of the main characteristiques of the Zero Defect Manufacturing in the High Level Group of Manufuture MANHEIM

11/2013

 

Tecnalia /
Politecnico di Milano

MANUFUTURE ASSEMBLY Presentation of the main characteristiques of the Zero Defect Manufacturing in the High Level Group of Manufuture VILNIUS

11/2013

 

Tecnalia

BIEMH 2012, Show leaflets of the project - BILBAO

6/2012

 

IBM Israel

HVC 2012, hosted by IBM Research – Haifa, is the eighth in the series of annual conferences dedicated to advancing the state-of-the-art and state-of-the-practice in verification and testing, 6-8/11/2012

11/2012

Link

ENKI

Medtec exhibition held in Stuttgart, Germany on February 26-28, 2013.

2/2013

 

Technion
BOSCH
University of Stuttgart

Updated poster of Muprod, presented in a conference by Bosch and University of Stuttgart

10/2013

 

Politecnico di Milano

Dr. Colledani was invited participant to the Manufuture 2013 Conference in Vilnius where a MuPRoD poster was presented

10/2013

 

Technion
BOSCH
University of Stuttgart

Updated poster of Muprod, presented in a conference by Bosch and University of Stuttgart

10/2013

 

BOSCH University of Stuttgart

Pictures of the poster that was presented at the IEEE EDPC-2013 3rd International Electric Drives Production Conference in Nuernberg, Germany. Website: http://www.edpc.eu/home/index.html

10/2013

 

Tecnalia /
Politecnico di Milano

MANUFUTURE ASSEMBLY Presentation of the main characteristiques of the Zero Defect Manufacturing in the High Level Group of Manufuture VILNIUS

11/2013

 

Politecnico di Milano

Dr Colledani presented the major MuProD achievements at the "EMC2-Factory 6th General Assembly meeting + Exploitation Seminar 26-28/11/2013" in Milan, Italy

11/2013

Tecnalia /
Politecnicodi Milano

HLG of MANUFUTURE Presentation of the main characteristiques of the Zero Defect Manufacturing in the High Level Group of Manufuture MANHEIM

11/2013

 

Tecnalia /
Politecnico di Milano

MANUFUTURE ASSEMBLY Presentation of the main characteristiques of the Zero Defect Manufacturing in the High Level Group of Manufuture VILNIUS

11/2013

 

Politecnico di Milano

Dr. Colledani was invited speaker at the VALUETOOLS 2013 - 7th International Conference on Performance Evaluation Methodologies and Tools that was held in Turin The talk was titled  “Analytical methods to support the configuration and reconfiguration of manufacturing and assembly systems”. Dr. Colledani presented application domains of MuProD and the related modeling issues

12/2013

 

Politecnico di Milano

Dr. Colledani was invited speaker at the “Panel discussion: Maximising Impact & Successful Innovation Strategy” within the 2013 EU Factory of the Future Impact Workshop, to report about the 4ZDM clustering activity

3/2014

 

TRIMEK

Metromeet, Bilbao

3/2014

 

Marposs

MANUFACTURING & AUTOMATION EXPO -STOCKHOLM, SWEDEN

3/2014

 

Marposs

GRINDTEC - AUGUSTA, GERMANY

3/2014

 

Marposs

MECSPE - PARMA, ITALIA

3/2014

 

Marposs

INDUSTRIE - PARIGI, FRANCE

3-4/2014

 

TRIMEK

Industrial Technologies, Athens

4/2014

 

Marposs

MACH - BIRMINGHAM, GREAT BRITAIN

4/2014

 

TRIMEK

Control Fair, Stuttgart

5/2014

 

Marposs

CONTROL - STOCCARDA, GERMANY

5/2014

Marposs

ELMIA AUTOMATION - JÖNKÖPING , SWEDEN

5/2014

Marposs

EUROBRAKE - LILLE, FRANCE

5/2014

Marposs

MSV NITRA - NITRA, SLOVAKIA

5/2014

 

Marposs

Intertool , Wien Austria

5/2014

 

Marposs

BIEMH - BILBAO, SPAIN

6/2014

 

Marposs

METALLOOBRABOTKA - MOSCOW, RUSSIA

6/2014

 

TRIMEK
Tecnalia

Bienal MH, Bilbao

6/2014

 

Marposs

FARNBOROUGH INTERNATIONAL AIRSHOW - FARNBOROUGH, UK

7/2014

 

Politecnico di Milano

Dr. Colledani will present the current status and the main results of MuProD at the meeting of the Italian Association for Manufacturing Technology (AITEM)

9/2014

 

Marposs

AMB - STOCCARDA, GERMANY

9/2014

 

Marposs

MSV BRNO - BRNO, CZECH REPUBLIC

9/2014

 

Marposs

BIMU - MILANO, ITALY

9/2014

 

ENKI

MEDTEC Italy 2014

10/2014

 

Marposs

GLASSTEC -- DÜSSELDORF, GERMANY

10/2014

 

ENKI

MEDICA COMPAMED 2014 (Dusseldorf)

11/2014

 

Marposs

PRECISION FAIR - VELDHOVEN, THE NETHERLANDS

11/2014

 

Marposs

PRODEX – BASEL, SWITZELAND

11/2014

 

Marposs

Compamed, Dusseldorf Germany

11/2014

 

IBM Israel

Haifa Verification Conference HVC 2014

2014

 

 

Other Activities

Partner Details Date Attachments
/Links

IBM Israel

IBM research blog that was uploaded recently, which also mentions MuProD

12/2012

Link

University of Stuttgart

Project description in German on the website of the ISW (University of Stuttgart):
http://www.isw.uni-stuttgart.de/index.php?id=712

9/2013

Link

TRIMEK

TRIMEK has joined the Spanish MANU-KET related to advanced manufacturing here TRIMEK contributes with the knowledge acquired in MuProd (Public Announcement)

2013

Politecnico di Milano

Dr. Colledani presented the main results of MuProD during the PhD defense event at Polimi

3/2014

 

ENKI

BtoB with client-Algeria

3/2014

 

ENKI

BtoB with client-Pakistan

3/2014

 

ENKI

BtoB with client-Turkia - Istambul

4/2014

 

ENKI

BtoB with client-Giordania

4/2014

 

ENKI

BtoB Mission ICE (Foreign Trade Institute) Tel Aviv – Israel drawing project with Poster+ brochure

5/2014

Photo 1
Photo 2

ENKI

BtoB with client-Kuwait drawing project with Poster+ brochure

5/2014

 

ENKI

BtoB with client-Libia drawing project with Poster+ brochure

5/2014

 

ENKI

BtoB with client-Polonia drawing project with Poster+ brochure

5/2014

 

All

The story of the MuProd project was published on the Horizon 2020 website under the title: "Zero tolerance for manufacturing faults“.

5/2014

Link

ENKI

BtoB with client-Yemen drawing project with Poster+ brochure

6/2014

 

ENKI

BtoB with client-Arabia Saudita drawing project with Poster+ brochure

6/2014

Photo

ENKI

BtoB with client-Mosca drawing project with Poster+ brochure

7/2014

 

ENKI

BtoB with client-Bulgaria drawing project with Poster+ brochure

7/2014

 

ENKI

BtoB with client-Asia orientale-Hong Kong drawing project with Poster+ brochure

7/2014

Photo 1
Photo 2

ENKI

BtoB with client-Asia orientale-Singapore drawing project with Poster+ brochure

7/2014

Photo 1
Photo 2

ENKI

BtoB with client-Asia orientale-Kuala Lumpur drawing project with Poster+ brochure

8/2014

Photo 1
Photo 2